1 / 1
PTC heater fan holder with IKEA Tisken adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A holder for a PTC heater with 60mm fan to hold it in place for my terrarium with an IKEA TISKEN suction base adapter.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 179
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print three part separately and glue them together.
I used PLA, my heater is only set to around 30C and it is attached to the intake side so should not be a problem. The printed model on the photo has a higher extruded grid, but that made it difficult to attach to the base.
Other parts:
- IKEA TISKEN hook (I have the earlier model, the adapter is the same)
- PTC heater
This is my first model created with onshape and my first uploaded model, any feedback is welcome! :)
