1 / 4
Case for the HiLetgo ESP-WROOM-32 Development Board — zdjęcie 1
1 / 4

Case for the HiLetgo ESP-WROOM-32 Development Board

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A model designed for the "HiLetgo ESP-WROOM-32 ESP32 ESP-32D Development Board".

Ocena
5 / 5
Polubienia
11
Pobrania
189
Wydruki
1
Wyświetlenia
960
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

I could not find a case that would fit my ESP32 that I found on Amazon, titled “HiLetgo ESP-WROOM-32 ESP32 ESP-32D Development Board” There was a model that said it did, but in fact it did not. Simple re-scaling just made new problems with the models i tested out (including the original of this one). I liked the look and style of this model, so I chose to modify it. It took a lot of trial and error as I am a noobie to 3d printing and model making of any kind (this is my first foray into modifying an stl), but here it is, hoping it will help someone looking as hard as I did. 

This was done on an Ender 3 v3 with regular PLA filament with a nozzle temp of 210 °C (standard settings).

Warning that this remix was not designed with functional button dents in mind, as I only use the esp for bluetooth and rarely use those buttons, if ever.

I also wasn't thinking about the holes on top for the status lights, but you an still see the light.

 

Tagi