Modular Honeycomb Shelves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple yet elegant modular wall mounted Honeycomb Shelves. Combine as many as you want to make your own Honeycomb Wall.
- Ocena
- 0 / 5
- Polubienia
- 57
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 971
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple yet elegant modular wall mounted Honeycomb Shelves. Print and mount them in the colors and configuration you prefer and extend them to your liking.
All files are available in two versions. The original sized set maxes out the Bambu P1P/P1S/X1C Build plate, but there is a separate set of files available as well, which maxes out the Prusa MK3/4S Build Plate to make optimal use of your individual 3D-printer.
Files:
- Standard Shelf
- Shelf with Drawers
- Honeycomb Pattern Backplate
- Screw Hole Hiding Caps
General Information:
Each shelf has four mounting holes, but my tests have shown that mounting them with two screws is enough. Caps to hide the screws are included with loose and tight tolerances, to match your 3D-printers capabilities.
Each shelf comes with the option to install a 10cm LED strip, there are channels on the backside to route cables from or to other shelves.
Print instructions:
Print without supports or special settings except for the two drawers, which need a tiny bit of support, you might get away without it, but it's not worth the risk in this case.
Installation:
Use the shelf itself as a template to mark where the holes should be, drill holes and mount the shelf with any countersunk head screws above 3mm head diameter. It's critical to make sure the first shelf is mounted perfectly level. Finding features on each shelf will help you to perfectly align the following shelves and prevent accidental mounting in a wrong orientation.
Happy honeycomb printing!