Filament sensor improved for Prusa mini base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved filament sensor holder for Prusa mini with "base" upgrade, the sensor is held firmly in place.
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 320
- Wydruki
- 21
- Wyświetlenia
- 2460
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since I switched to the BMG mini extruder (thanks to firmware 4.3.3), I sometimes have trouble removing the filament from the printer.
The extruder motor “stall”when unloading the filament, the only solution I have found is to help the filament exit by pulling it out when ejecting. However, when I help the filament in its exit, the filament sensor is often ejected from its place and it is really very frustrating...
I share with you a support that allows the filament sensor to be held firmly when using the base.
Just print the 2 provided files, le fsensor box is here :https://github.com/prusa3d/Original-Prusa-MINI/blob/master/STL/MINI-fsenzor-box.stl