Fluke_101_Stand Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple base for use with Multimeter stand (Scale for use with others, glue them on.)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple base for use with Multimeter stand (Scale for use with others, glue them on.)
Post-Printing
Reinforce if needed
3mm hollow in towers to allow heated inserts & machine screw, mor just glue in a 3mm dowel
Great Stand but wanted cable management, so 5mins in tinkercad came up with this.
Imported Fluke 101 Stand by nicklargent, into tinkercad as template for minor inset to align before gluing stand fr stability. Posts have 3mm holes through centre to allow for strengthening or repair if needed, insert a threaded insert from top deeper in front or back to allow insertion of probes, insert machine screw from bottom, or if nt available just glue in a dowel.
Not needed by me as yet but now I've said it Murphy will no doubt strike.Category: Electronics