1 / 4
Wind turbine
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello, here I have a functional wind turbine for you.
There are 2 mounting options:
- *There is a hole at the bottom of the stator, into which a rod with a diameter of 10mm can be inserted. If the rod is slightly larger or smaller, it will still work. It can then be secured with 2 cable ties or similar.
- The plate is 85mmx85mm in size. You just need to drill a hole in the desired location to be able to screw it in place.
For the rotor, I recommend attaching supports, but it should also work without them.
*If the plate is not needed, simply cut it off in the slicer.