1 / 4
Wind turbine
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello, here I have a functional wind turbine for you.
There are 2 mounting options:
- *There is a hole at the bottom of the stator, into which a rod with a diameter of 10mm can be inserted. If the rod is slightly larger or smaller, it will still work. It can then be secured with 2 cable ties or similar.
- The plate is 85mmx85mm in size. You just need to drill a hole in the desired location to be able to screw it in place.
For the rotor, I recommend attaching supports, but it should also work without them.
*If the plate is not needed, simply cut it off in the slicer.