Counting matching models…
stuff needed: possibly a drill to drill the mounting holes on the 4010 turbines to fit M3 bolts, because I can't be bothered buying M2.5's; 8 M3x6 bolts, possibly M3x8 with a washer; 8 6x2 or 6x3 magnets; superglue to secure the magnets;…
This pen holder was inspired by turbine blades, and is made to look rad while holding your desk pens and pencils. Category: Containers
if you have problems folding, write to me on printables messenger TUTORIAL COMING SOON… This model is designed to last a long time, but print with PET G or better materials. The model contains screws and bearings that must be purchased.…
A turbine herb Grinder based on the morph ball from Metroid. It is print in 2 pieces. It (kind of) working It is a reupload of my thingyverse.
One day, i break my old turbine on Dexp FD-1250-P dryer, and desined my own
The individual parts need to be glued together. The entire model is about 45 cm high. The head of the power station includes the motor that spins the blades. I recommend printing the model's leg with a thicker wall so that it does not…
All parts were printed on a P1S 3d printer. In addition to the top and base, you will need to print 10 foil pieces. Print Settings: Infill: 0% for each foil. 5% for the base and top Infill Pattern: Gyroid. Layer Height: .2mm for the base…
You will have to print the other two parts from the original model you can follow the description there
I also have an M130 motor, but after discovering that I couldn't print the previous model with a 0.4 nozzle , I decided to modify it so that the Bamboo A1 Mini could handle it. For printing , it is better to turn the model upside down .
A wind turbine with a vertical axis of rotation. It's best to print the model with supports, but it can also be printed without them. One of the faster models, wall 1, 5% infill. To be mounted on a rod without bearings.
Descripción / Description: ES: Diseñé esta hélice helicoidal de tres palas pensada para proyectos de energía renovable, como turbinas eólicas de eje vertical (VAWT), o experimentos de dinámica de fluidos. Su diseño permite capturar el…
Remember those brittle turbines on the rotor shaft of an electric fan motor? This is it. It's useful to cool the electric fan motor. And they're not for sale anywhere.
This is a funny whistle which combines the principle of a turbine with a air raid siren. this model has almost no sense but to be fun :) it gets better over time due to the grinding of the seams on the barrel a bit of silicone spray in…
The only thing that is important for this model is enabling elefant foot compensation so that the print will turn out very precise otherwise the whistle wont make a sound.
A super cheap and simple way to upcycle a new prusament spool into a water turbine wheel. the conversion is fully reversible and uses no additional hardware. Use the 9mm hexagonal connectors to add to customize for your project. It's a…
Compact Small-Scale Gas Turbine Engine MT-20 (19 kgf) MT-20 is a compact small-scale gas turbine engine (turbojet engine) manufactured by JSC “Motornaya Lavka”, with a thrust of 19 kgf, designed for: • high-speed fixed-wing UAVs; •…
This is a model of an early 20th century water wheel, (now more commonly called a Francis turbine) that is designed for low heads. Instead of wicket gates, it uses a cylinder that throttles the flow going into the runner by lowering the…
GENERAL INFO Designed for 5x8x2.5 mm bearings and M2x30 bolts with nuts for mounting (you can use shorter ones). A 5x14 mm output shaft with a 1 mm deep indent. The inlet inner diameter is 5 mm. 49mm length, 33.5mm without shaft. 45x32…
GENERAL INFO Designed for 5x8x2.5 mm bearings, M2x18 and M2x30 bolts with nuts for mounting. For the shaft, it uses an M2x30 bolt, which makes the output shaft 15 mm long. The intake outer diameter is 6 mm wide and 15 mm in length. 44mm…
“What's that noise? Do you have a jet turbine in your room?” Now you can say “Yes” and point to the mini jet turbine that sits on your MasterLiquid Atmos AIO Liquid Cooler , knowing full well that it's your graphics card choking on the…
Thanks to rosch8 for the great original wind turbine. I took the rotor blades from the original wind turbine and modified them. Made the wind turbine smaller, it's 160mm in diameter and 175mm long. A 0.3 mm nozzle would be recommended for…
Thanks to vladua for the great wind turbine. https://www.thingiverse.com/thing:3627007 I wanted to have the bearing completely below the wind turbine. To do this, I enlarged the bars at the top and bottom and added 8 mm holes. I added a…
Thanks to vladua for the great wind turbine. I enlarged the wind wheel to a diameter of 170 mm and a height of 196 mm and adapted it to my proven bearing for an 8 mm metal rod. The wind turbine parts can be put together without reworking,…
Thanks to astfaellergerald for the Vertical Windturbine Ver. 2. I like version 2 (NEW P1-5) by astfaellergerald very much, but cleaning and gluing all the parts takes some work. I've been contemplating putting the top and bottom halves…
Thanks again to rosch8 for the beautiful original wind turbine. I recommend printing the successor, the MK3. The bearings on the MK2 wind turbine are difficult to install without causing binding, and temperature fluctuations can also lead…
Turbine utilising a combination of direct impact and cross-flow propulsion. This is based on the Ugrinsky turbine design with a simpler geometric construction composed of only circles. The design spins well from breath power, but would…
Thanks to rosch8 for the really great original wind turbine. After the original wind turbine had been running without any problems for some time, I wanted to make it bigger. Increased the hub, rotor blade and spinner to 150% and changed…
Abdeckung des Staubsaugermotors in einer selbst gebauten Werkstatt-Absaugungsanlage. Dieses verhindert zuverlässig, dass der Staubsaugerbeutel sich direkt auf die relativ kleine Motoröffnung legt und ihn somit verstopft. Print Settings…
Thanks to Lukass for the great wind turbine ... After the blue wind turbine broke on the struts in a gust of wind, I reinforced the rotor. The reinforced version has also weathered storms. For my installation situation I changed the…
Hello, here I have a functional wind turbine for you. There are 2 mounting options: *There is a hole at the bottom of the stator, into which a rod with a diameter of 10mm can be inserted. If the rod is slightly larger or smaller, it will…
Didn't find a turbine that work so i made mine. Use with a long 8mm threaded rod and 2 F8-22 bearing. Maybe you can use 608 bearing but didn't test it. Enjoy !
Thanks to rosch8 for the great original wind turbine model, and thanks to Stuart800 for the Double wind turbine MK3 counter rotating. Your models have been a great inspiration to me. I created my own version with some changes. Enjoy it !…
all you need are two 2 by 6mm round neodymium magnets, a drop of glue and a few gramms of fillament ;-) Glue the magnets onto the rotor, after putting the spacer around them and put it into the duct. The duct goes on by removing two…
This is the first version of my vertical axis wind turbine. (V.A.W.T.) This first version is completely inspired and modified by the Aeolus project. In the future I will publish other changes after carrying out the first tests of…
An attempt at high static pressure centrifugal fan This design can be categorized as a single-disc tesla turbine. It's purpose is to serve as intermediate between turbine fans and positive displacement pumps. It's designed for pumping air…
I needed a replacement blade for a Pelton Turbine Wheel, so I modelled my own. Bolt holes for M3 bolts.
This is a windturbine made from plastic waste. It can be made with easy to find parts and is completely open-source. With it's maximum power output of 100W, it proves that real power can be made with a much smaller carbon footprint than…
The 2m windturbine is a ‘proof of concept’, to prove that a windturbine with a wingspan of 2 meter and peak power of 450W can be 3D-printed with a household 3D-printer, The design is largely based on the 2F Ferrite Windturbine made by…
Not the most efficient vawt but it is fully 3d printed and it works with 3d printed bearings. Use 16mm PVC tubes or with any other diameter pipe (see openscad file for full hack). OpenSCAD files available. I'm using the parametric printed…
Just a simple Turbine Blade made as a replacement for a freinds Aircraft Model.
Concept This is a simple external turbine model designed in-house to release to the public. If you're looking for more complicated one that actually has the ability to store energy please use another model! This original design was…
My design of a HAWT :) Just stick asemble and/or use some glue. Total maximum height: ca. 292,5 mm Tower/Stem: ca. 145 mm Blade: 99,5 mm Check out my other designs here on thingiverse :) Print Settings Printer: CTC Bizer Dual Rafts:…
Wanted to use the turbine on my Dremel 4000 and included some adaptations along the way. Make sure you pause the shroud print to insert the M3 nuts. The bearing adapter is a tight fit, I added a small washer between the impeller and the…
Blasting out from the pages of the dynamics Skybound comics, let’s bring the scrapped-together trailer turbine which Wheeljack put together! Ostensibly built to tap onto the hydroelectric dam for (laudably green) energy to revitalize…
THIS MODEL IS OUTDATED. There is a newer version available: https://makerworld.com/en/models/550884 There is a more recent version that works better this easy to print wind turbine looks great on any fence post or wall, with the easy to…
Wind turbine model in cross-section with gearbox and generator and rotating blades I have always been fascinated by wind turbines, their majesty and size as well as their function. Therefore, I prepared a model that would show the…
Just for learning to model Objects ;-) You need: 3 x M3 Squarenuts 3 x M3 Screws 2 x Ballbearings 1 x Motor/Generator Update 22.05.2018: added a Baseplate with mount for a pipe Print instructions Category: Buildings & Structures Print…
Hier seht ihr ein kleines projekt mit einem Getriebemotor entstanden durch das interesse meines kindes an Windräder. Ich wollte dann einfach mal eins mit nachhause bringen :D. Ich habe lange getrüftelt und die Teile so einfach wie möglich…
Miniature Tesla Turbine. Will work great with real bearing but can be tested with the mock-up bearings provided. Also available here: https://www.thingiverse.com/thing:5176460
Multi Blade Wind Turbine Hub for classic wind mill design. You can make the blade with a cardboard or PVC.
I found that printing the wind turbine blades so that they were perpendicular to the bed works best. Make sure to add a brim as nozzle has a tendency to pull the blade off the bed the taller the print gets.
Instructions below All parts printed at 0.2 15% infill 0.4 nozzle. Use tree slim supports for turbine block.
There is a newer improved version Better 3D printable wind turbine V3 all the joints are bearing joints, use a vice to press them all together, put the head and base together first, then the turbine blades, then add the tail last
This is a print in place toy. Blow through mouthpiece and the rotor spins. Printing Tips Should be an easy print. There is a bit of bridging, clean away any fallen extrusions after print.
Cela faisait quelque jours que je m'arrachais les cheveux pour l'aspiration et l’évacuation des odeurs et des poussières, mais pour cela il faut un système d'aspiration plus performant que le petit ventilo. Si comme moi vous préférez…
Dies ist eine Entwurf, sobald ich Verbesserungen vorgenommen habe kommen Updates. Gedruckt wird es aus PETG mit einer Ø0,4mm Nozzle und einer Schichthöhe von Ø0.2mm
stuff needed: possibly a drill to drill the mounting holes on the 4010 turbines to fit M3 bolts, because I can't be bothered buying M2.5's; 8 M3x6 bolts, possibly M3x8 with a washer; 8 6x2 or 6x3 magnets; superglue to secure the magnets;…
This 3D printed wind turbine design can be part of the cool things for 3D printing. It can be ideal for hobbyists or sustainability enthusiasts who love exploring clean energy technology or want to explain how wind turbines work. Here you…
Custom Designed Wind Turbine - Version 1.1 12-24V The following description will help you understand the plans for my custom-designed wind turbine. The project is based on a hoverboard motor, which serves as the generator. Most of the…
This is a remix of Bakefy's excellent Turbine Whistle found here: http://www.thingiverse.com/thing:1031756 I just redesigned the top to slip over and clip on, so that no super glue is required... Even with it not being 100% airtight, it…
If you like power generation as much as I do, you need to have a turbine wheel to show how fast your extruder is extruding or retracting.
It has low tolerances, so it's easy to print. Use slim supports and be careful when removing them, or the blades might snap off.
This pen holder was inspired by turbine blades, and is made to look rad while holding your desk pens and pencils. Category: Containers
A turbine whistle is a sound produced by the discharge of high-speed airflow from a turbine, commonly found in various industrial applications, including power generation and jet engines. The whistle occurs when air or gas escapes at high…
Bring renewable energy to life with this highly detailed and customizable 3D Wind Turbine Model . Perfect for hobbyists, educators, engineers, or anyone passionate about sustainable technology, this model is designed to be 3D printed and…
You need a 10mm bearing that is 4mm thick and has a 5mm hole and a M4 screw.
You need two 16mm bearings, 5mm thick with an 8mm hole, one 22mm bearing, 5mm thick with a 8mm hole, and 5 M5 bolts. Some parts like the blade and stand you can seperate in your slicer to print seperate!
Usable with 2, 3 or 6 blades Additional Hardware: 2 608 bearings Some M8 threaded rod and nuts for the rotor axle A M12 threaded rod for the orientation axle I used electrical tubing and cardboard for the tail The module 0.5 gear was…
3 Iterations of the simple basic piramid stand concept. Full, hollow and semihollow
Nearly identical to original, modified to accept 3/8" shafts Stopper: printed in 0.2mm layer, 15% infill with 100% infill on the bearing shaft Clamp: printed in 0.2mm layer, standard settings Clamp bolt: printed in 0.15mm layer, standard…
A compact and practical wind turbine designed for STEM projects, this model is easy to build using 3D-printed parts and recycled materials like a DC motor, bottles, and a broomstick. It does not include energy storage or electronic…
This is a 500mm tall VAWT built with a ¼ inch threaded rod as the vertical axis in mind. I had to chop up the model in order for it to fit my printer, but I included the uncut models too. In the center of each plate is a space for a ¼…
The following was printed in ASA, but can be printed in any other material as well. Have in mind that the tolerances in the design consider a BambuLab X1C. You may need to modify according to your printer opr material selection.…
Note: Please check out https://www.kickstart-design.com for product design inquiries. Based in Milwaukee, Wisconsin, Kickstart Design LLC is a product development I co-own/operate. We offer a wide array of services that help makers turn…
Note: Please check out https://www.kickstart-design.com for product design inquiries. Based in Milwaukee, Wisconsin, Kickstart Design LLC is a product development I co-own/operate. We offer a wide array of services that help makers turn…
Turbine, Lüfterrad oder Propeller konstruiert mit Fusion360. Alle Merkmale können in Fusion360 über das Menü “Ändern > Parameter ändern” angepasst werden.
💡Originally designed to replace a damaged drill part, this modular and customizable turbine fan was created using OpenSCAD. Its parametric nature allows you to easily adjust features like blade count, diameter, and curvature to perfectly…
This is a smartphone holder for the office or other tables at home. With this stand the phone can be easily attached to the magnet at the top of the stand. The magnet is the only a purchasing part. The current design is optimized for the…
Still working out its kinks, but is functional. Further testing and revision is required to optimize efficiency. Let me know if you do decide to make this, I'm new to this topic and would appreciate any guidance or general advice, thanks.…
GEN 1 TURBINE GENERATOR Item Description: GEN-1 is a compact, high-efficiency turbine generator built for makers, engineers, and DIY energy enthusiasts. It features six bobbins , each wound with 27 AWG magnet wire at 300 turns , producing…
Its an Turbine blower remix to fit an 775 motor. The original is from JolietDelta. I improved the design to fit an 775 motor. Also the turbine is a lot bigger than the original, the parts fit on an 200x200x100mm (LxBxH) bed. You can…
This miniature wind turbine shows the power and limitations of this renewable energy source. In the sample code, you'll see how much voltage this mini turbine produces, and the estimated rotations per minute (rpm) of the turbine. This…
Description PDF This is the third version of my vertical axis wind turbine. (V.A.W.T.) This third version is completely inspired and modified by the Aeolus project. In the future I will publish other changes after carrying out the first…
Note I not use stock resistor. I change turbine resistor to resistor like on photo. Recommended use turbine with adjust speed, or power supply with voltage adjust, because if you use hose from cable channel can generated very high noise!…
This is a 120mm fan grill inspired by turbine design (aircraft engines, wind turbines, etc.) and Silverstone Air Penetrator fans. Prints in two parts without support material. Support If you'd like to support me for the 3D models I…
Designed to use the existing wingbolts of the aircraft, it can be mounted on either the left or right side of the tailplane (or both). Runcam6 holder is retained with the separate (green) piece which is screwed down with a countersunk M3…
