1 / 3
Reverse Bowden Adapter (for OrzOrzOrz's Neptune 4 KUSBA Shroud) — zdjęcie 1
1 / 3

Reverse Bowden Adapter (for OrzOrzOrz's Neptune 4 KUSBA Shroud)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A reverse Bowden adapter for OrzOrzOrz's Neptune 4 KUSBA shroud.

Ocena
0 / 5
Polubienia
12
Pobrania
58
Wydruki
0
Wyświetlenia
705
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Designed for use with OrzOrzOrz's Neptune 4 Shroud with KUBSA spacing. 

This adapter allows you to easily mount a Bowden tube coupler to your extruder. It is designed to prioritize strength, ensure clearance for the indicator wheel, and allow access to the extruder lever.

Try this out with my mount for the BTT SFS v2.0 sensor

Updates

  • August 13, 2024 - Adjusted the height and thickness for better fit and strength

Bill of Materials

  • 1x - M10 Threaded Bowden Coupler Fitting
  • 2x - M3x8mm Socket/Button Head Bolts (allowed me to also mount the KUSBA accelerometer over the adapter as needed)

Print Settings

  • 4 Perimeters/walls
  • 100% infill
  • 0.2mm layer height
  • 0.4mm line width
  • 5 top and bottom layers
  • Parts are pre oriented in the correct position for printing
  • Supports required (I recommend normal with the snug option, see below)

Tagi