Soft Hex Planter Pot with Drainage Holes and Drip Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hexagonal based planter pot with drainage holes and a custom sized drip tray.
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 222
- Wydruki
- 4
- Wyświetlenia
- 846
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
A hexagonal based planter pot with drainage holes and a custom sized drip tray.
The planter walls are 3mm thick so it is plenty strong. There are 7 drainage holes in the bottom of the planter to account for over watering. The drip tray is custom sized to hold the planter up just a little bit for letting any drips evaporate and dry.
Printing:
You can print this without support as the steepest angles are 45 degree angles. I printed this with 1mm walls, 40% gyroid infill, and at a max speed of 70mm/s with all of my prints, which is why the print time is long. But printed with Polymaker PolyTerra Matte Marble PLA Filament in the Marble Brick color makes a beautiful and strong print.
Depending on your bed adhesion I suggest a brim to help from warping the bottom of the print.