Taller display cover for Camping Kyria Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model can fit the Adafruit KB2040 - RP2040 Kee Boar Driver underneath.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 180
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really love the https://www.printables.com/model/589488-camping-kyria-case but there were some minor adjustments I wanted to make to the display cover.
To use this to you'll probably need to drill the screw holes to the 1.6mm they are supposed to be. After that I suggest you tap the holes with m2 screw (or tap if you happen to have one) before fitting it.
NOTE: Like the original, the display header DOES NOT match the holes in the kyria rev3 pcb, so you'll need to connect them with wires and fit those inside the cover as well.