Bottle Shaker 2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple hand-operated bottle shaker based on a crown and pinion mechanism
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 1570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Are you tired of having numb arms after hand-shaking your bottles of e-cigarette liquid, modelling paint and more? No? Well, we are!
Featuring an adjustable, self-closing clamp to accommodate different sized bottles, an ergonomic handle to firmly grip the shaker and a gear and pinion mechanism, the Bottle Shaker 2.0 will make your life easier, one crank turn at a time!
Other than the printed parts you will need:
- 3x M3 heat-set threaded inserts (5 mm outer diameter, 4 mm tall)
- 2x compression springs (5.5 x 38 mm)
- 2x 608ZZ ball bearings (22 x 8 x 7 mm)
- 2x long machine screws (M3 x 60 mm)
- 1x short machine screw for the crown (M3 x 20 mm)
- 1x washer for the crown (12 mm outer diameter, 3 mm inner diameter)
- 1x medium machine screw for the pinion (M3 x 40 mm)
- 2x washer for the pinion (8 mm outer diameter, 3 mm inner diameter)
- 1x M3 nut for the pinion
Printed with Polyterra PLA, 3 walls, infill 20%. The crown gear with the print in place crank is best printed with 30% infill.