Anycubic Kobra Max LCD / Screen 90d Holder/Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for the LCD screen of the Anycubic Kobra Max in a 90° turned position. Screen now accessible from the side.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 373
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The 3Dprinting Workbench wouldn't fit this monstrosity of a printer, so I had to put it on sideways. Naturally, the screen now needed to be turned by 90°, to still be accessible.
I made two versions: One taking up fairly little space, but facing more forward, than upwards. The other is angled further up, which improves accessibility if the table/workbench is lower.
Installation notes:
- Attach to screen first, then to the printer
- you have to reroute the wiring through the cable management clip as it will be too short otherwise
Printed at 100% with (neglible) supports. Need to change orientation so it lays on the flat side.