Lazy Susan - Fully Parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully parametric Lazy Susan
- Ocena
- 0 / 5
- Polubienia
- 51
- Pobrania
- 213
- Wydruki
- 0
- Wyświetlenia
- 1832
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I was looking around and unable to find a good version of a Lazy Susan. I made this one fully parametric. You can adjust multiple parameters depending on what you requirements are (see picture).
- Number of bearings
- Bearing OD
- Top and bottom thickness
- Sidewall gap between top and bottom
- Knurling on the OD
I have included STL's for 300mm OD using 10mm bearings and 150mm using 5mm bearings. These have been provided with and without knurling.
To include Knurling on the OD you will need to “unsupress” the grouped features on the bottom timeline in Fuzion360. When adding Knurling you will also need to account for the added thickness required on the “Top sidewall thickness” parameter. See photo included.
If there is a size you need and you don't know how to use Fuzion 360, let me know and I can make it for you.
Happy printing!!