Napoleon Grill Rogue XT 425 Gas Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gas Grill Knob for the Rogue XT 425 and 425 SIB (Side Burner). Recommend to use a material suitable for outdoors.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 456
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Gas Grill Knob for the Rogue XT 425 and 425 SIB (Side Burner). Recommend to use a material suitable for outdoors.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1S
Supports:
Yes
Infill:
15%
Filament:
Bambu PLA
Notes:
Recommend to use Tree Support for the internal post cylinder otherwise, you'll have to print this with the top face down and the support gets kind of ugly on there. I would use a strong tree as a weaker tree for me, when I did my 3rd print, the D post was a little sloppy but it worked.
FreeCAD
Simple 2D sketch using 25% cut out and the revolver. Copied the post measurements and after 2 failed prints finally got the size right for the D slot.
Took measurements from the original but modified it for a faster print time. The original measurements would have taken 8 hours with the support, so I modified the lip geometry so that it takes just about 3 hours on my printer.Category: Replacement Parts