1 / 5
Napoleon Grill Rogue XT 425 Gas Knob — image 1
1 / 5

Napoleon Grill Rogue XT 425 Gas Knob

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Gas Grill Knob for the Rogue XT 425 and 425 SIB (Side Burner). Recommend to use a material suitable for outdoors.

Rating
0 / 5
Likes
1
Downloads
56
Makes
0
Views
456
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Gas Grill Knob for the Rogue XT 425 and 425 SIB (Side Burner). Recommend to use a material suitable for outdoors.

Print Settings

Printer Brand:

Bambulabs

Printer:

Bambu P1S

Supports:

Yes

Infill:

15%

Filament: Bambu PLA

Notes:

Recommend to use Tree Support for the internal post cylinder otherwise, you'll have to print this with the top face down and the support gets kind of ugly on there. I would use a strong tree as a weaker tree for me, when I did my 3rd print, the D post was a little sloppy but it worked.

How I Designed This ===================

FreeCAD

Simple 2D sketch using 25% cut out and the revolver. Copied the post measurements and after 2 failed prints finally got the size right for the D slot.

Took measurements from the original but modified it for a faster print time. The original measurements would have taken 8 hours with the support, so I modified the lip geometry so that it takes just about 3 hours on my printer.

Category: Replacement Parts

Tags