The100 HGX-Lite (Sherpa Mini) Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount to hold the HGX-Lite on the extruder mounting holes of the100 3d printer with a stronger bowden connector.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 838
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
My normal bowden connector kept slipping out of the hole on my HGX-Lite. Made a mount that holds the extruder (upside down) and uses a more securely held M10 bowden connector. The larger M10 style is needed, as the tube passing though and into the base of the extruder.
I made the 3 mounting holes, and ended up not using the middle as the bowden connector makes it hard to access.
I printed with the extruder mounting surface flat on the bed without supports, to make the M10 hole as strong as possible. attached a photo from the slicer.