The100 HGX-Lite (Sherpa Mini) Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount to hold the HGX-Lite on the extruder mounting holes of the100 3d printer with a stronger bowden connector.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 39
- Makes
- 0
- Views
- 841
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
My normal bowden connector kept slipping out of the hole on my HGX-Lite. Made a mount that holds the extruder (upside down) and uses a more securely held M10 bowden connector. The larger M10 style is needed, as the tube passing though and into the base of the extruder.
I made the 3 mounting holes, and ended up not using the middle as the bowden connector makes it hard to access.
I printed with the extruder mounting surface flat on the bed without supports, to make the M10 hole as strong as possible. attached a photo from the slicer.