Credit Card Size MicroSD Card Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds 12 microSD cards
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 146
- Wydruki
- 1
- Wyświetlenia
- 625
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Updated: 21 June 2024
Thinner version at 1.4mm, 12 slots
At only 1.4mm thick, this microSD card holder securely holds up to 12 cards, easily stacks with other cards in your wallet or card holder.
Optimized with the following print settings:
Layer height : 0.15
Initial layer height: 0.2
Top layers: 0
Bottom layers: 0
Walls: 2
Infill: 100%
Infill directions: (0,90)
Infill type: Lines or Zigzag
Material: PETG
Usage:
Insert card at an angle into slot, once flat in the slot, pinch card through slot opening and push in, card should be held in place by the tab. To take out a card, pinch card through the slot opening then pull until card is released from the tab, push from behind through the slot opening then pull out completely.