AMOLEN 200g adapter 1 side with 2clips 32.5mm spacing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AMOLEN 200g Spool adapter for Bambu AMS
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I didn't like any of the designs online so I made these. They use the existing holes in the AMOLEN spools.
***There are 2 kinds of 200g AMOLEN spools available on Amazon.
**Please make sure you pay attention to the “peg/hole spacing” of your 200g spool.
**These are for the AMOLEN 200g spools where the holes are roughly 32.5mm apart.
When I'm able to receive the other type of AMOLEN 200g spools, I'll make another that has the proper “peg/hole spacing.”
I have also adjusted the clips to have a rounded side, this should help the filament from catching for some users.
