1 / 4
Magnetic Plier Holder (Magnetischer Zangenhalter) — zdjęcie 1
1 / 4

Magnetic Plier Holder (Magnetischer Zangenhalter)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnetic Plier Holder (Magnetischer Zangenhalter)

Ocena
0 / 5
Polubienia
3
Pobrania
17
Wydruki
0
Wyświetlenia
120
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The plier holder has been made especially for pliers like welding tongs as shown on the pick. We use them to graß hot PCBS comming out of the reflow oven.

Designed for two 20x5mm (round or square) magnets.

Material: PETG
Layerheight: 0.2mm
Infill: 25%

Tagi