Modular SMD feeders and baseplate for Powatec Expert II
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used the design from @stanoba and adapted it to have space for 15mm thick tapes. Also widened the the open window so…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Used the design from @stanoba and adapted it to have space for 15mm thick tapes. Also widened the the open window so it matches for our usage on our manual PnP machine Powatec Expert II.
Added a baseplate which slides on the base plate of the PnP machine (61mm x 6mm cross section) and devided it into three baseplates with 7 8mm feeders each with a numbered label attached. Other feeders can be slided on.
The baseplate has a hole underneath to feed the empty tape back.
Print Settings
Printer:
BambuLab X1 Carbon
Rafts:
No
Supports:
Yes
Resolution:
0.2mm / adaptive
Filament: Extrudr PLA Black, white, blue, red
Notes:
Using adaptive layer hight to smooth the ramp of the feeders. Other parts printed in 0.2mm layer hight.
Using different colors to distinct between different feeders sizes.
Category: Machine Tools