Liczymy pasujące modele…
This a CP40 tool holder for LumenPnP/OpenPnP based on this work: https://github.com/richardklingler/openpnp/tree/master/openscad/toolchanger I've combined all the layers so that can be easily printed with a single material. Printed with…
OpenPnP Component Scrap Recovery Box This 3D-printed part is designed for collecting and recovering unused or rejected components in OpenPnP pick-and-place systems. It helps keep the work area clean and improves operational efficiency by…
This is a remix of the main housing of @Rainer's Core One ESP32 Camera Case. I was looking for a USB Plug-&-Play solution for my Core One to connect straight to my Octoprint Raspberry Pi. I didn't like the ESP32-CAM module so I decided on…
Tray for neoden yy1 mounting machine for D2PACK components (15 pcs). When printing, it is necessary to insert 2 neodyne
Tray for allowing PnP of Pico Pi or Pico Pi W. I have had success with a N24 nozzle with a 500ms dwell during pick and place
Even though I liked the minimalistic design of the original LumenPnP strip feeders, they had some difficulties with both thicker paper tape (like 1.2mm thick with more bulky capacitors) being hard to push all the way through as well as…
If you have cleared off the underneath of your build plates, you can fill these holders up with M3 nuts (example from AliExpress here ). You will need to use the 4 corner holes (or others that work best for you) to attach the holder under…
This allows you to use a 550mm linear rail which is easier to source than the stock 525mm rail.
Only renforced rail because I break them more than propellers Category: Hobby
Created to store WOTOFO SMRT PNP coils. M3 30mm grub screw needed for hinge
As per my need I have designed tokens tray and tokens bases for my The Night boardgame PnP version. Printed mutlicolor with single nozzle. It requires spool 3 times to be manually changed. Attached gcode for PETG with manual spool change,…
This is a mount for the Framework printable case I used to attach it to my LumenPnP. It mounts on the lower left extrusion, right next to the the control unit, enabling easy cable routing. Printing To print, print two copies: one as-is,…
This is a support that should be attached to the v-slot y-axis, making it possible to use longer strip feeders (or two strip feeders tagged along). I've designed a general model, and four specific variants that fits the blade teeth,…
Printed in PETG, is holding up well for me, designed to be able to print on 150mm build plates I insert a heat insert in the existing camera and plate support so that I can screw the extensions into it. (5mm bolt)
It is the Menlu stripfeeder of @ERIK3DP_1763971 but remixed into the Opulo formfactor so for OpMenlu.. These feeders push the strip upwards clamping them down so components don't jump out. Compared to other strip feeders these are the…
This is a collection of 3D-printable parts that can be added to a LumenPNP v3 pick-and-place machine to allow the use of Mark Maker's (makrzone) ReferencePushPullFeeder feeder. I've had very good success with these feeders and I really…
OpenPnP Fiducial Riser Platforms to put OpenPnP fiducal targets on, 24mm and 34mm high.
Prototype for a drop in replacement for drawer to roll out conversions. Or for any drawer using common hardware that needs to clear a hinge or other obstruction. The tabs should fit into holes fit for Richelieu glides, and others using…
this is an easy to release version of my earlier version i also made changes to make printing in place easier can now accommodate three thicknesses.
This is a replacement for the two support center support legs for the LumenPNP. It replaces them with three 20x20 extrusions and a few standoffs. You will need M5 bolts and drop in T-nuts for the 20x20 extrusions.
Parametric Open SCAD files here on github: https://github.com/pontech/parametric-strip-feeder !!! WARNING !!! I don't use this feeder anymore. I've switched to Menlu style feeders because they much easier to deal with and protect parts…
Warning this project is Under Development, im waiting for parts to arrive!! The Dymo LabelManager PnP is a great USB printer with one issue, It KILLS its batteries. I'm not sure of the root cause of this though, it delivers 8.3V that…
Tested on my Lumen v3.1.2 Open PNP Machine I've combined features of two models. The model is primarily based on the model by dgoodlad but then I picked up the parts catcher feature of the qwertymodo model. The included discard cup is the…
Mount a smaller version of the LumenPnP's datum board, without moving the primary fiducial, to enable 3D calibration. Print requires supports and changing the bolts from M3x16 to M3x20. It places the secondary fiducial 5.6 mm (4 mm for…
For the Game: Twisted Cryptids, by Unstable Games PnP Meeples: Drop Bear (Elegoo Baby Blue - https://a.co/d/gRwb1D1) Kelpie (Elegoo PLA Sea Green - https://a.co/d/9v5i8Ad) Kraken (Sunlu PLA Pink - https://a.co/d/0HzYzns) Also included is…
Lumen PNP V4 x-cable-chain-support split into 3 parts for printing. The original part is 655mm long, sadly for most of us this is to large to print as one part. I split it into 3 parts with joining tab, so it is printable on a smaller…
CHANGES FROM ORIGINAL: Added 16mm, 24mm, & 32mm Menlu Strip Feeders. Updated all feeders to work with EIC-481-C standard max component heights. STEP FILE instead of STL Update 8/4/2025: Added top camera compatible Menlu-EH (extra high &…
This a CP40 tool holder for LumenPnP/OpenPnP based on this work: https://github.com/richardklingler/openpnp/tree/master/openscad/toolchanger I've combined all the layers so that can be easily printed with a single material. Printed with…
Use a pair of M6x8x8 heat set inserts in the holes and reuse screws off factory ECU. Print without supports. Use a material that can withstand being in your Miata in the summer like ASA. I used translucent PETG to keep with the theme of…
Replacement tip for the Voopoo PNP X pod (tanks), use the o-rings from the old one or just put a little dot of superglue
PARTS LIST: Epomaker EK21 (I have no idea what the difference between the Zebra and Wisteria switches are, so good luck.) 3D Printed LumenPnP Jogpad Keys Optional: USB Extender , only needed if you're running out of USB ports like I was.…
I have a couple of PNP pods and find they often weep a little when left for a while. To save them leaving a wet patch I created these simple stands to store spare pods when not in use. Print Settings Printer Brand: Creality Printer: Ender…
I designed these PCB Holders and Feeder Strips to clip to the edge of the build plate on the Lumen PNP using 0.75" binder clips. This design allows for both the feeder and the PCB to be mounted anywhere on the build plate. It is only…
I wanted to put my LumenPnP on this rolling desk that is only 23.5" inches deep. The soft pads of the feet just fit on the surface, but I wanted something to positively retain the PnP on the table in case it got bumped. The rear foot has…
OpenPnP Component Scrap Recovery Box This 3D-printed part is designed for collecting and recovering unused or rejected components in OpenPnP pick-and-place systems. It helps keep the work area clean and improves operational efficiency by…
This 3D printable adapter allows you to power a DYMO LabelManager PnP using a standard 9V battery , as a direct replacement for the original internal rechargeable battery. If your original DYMO battery is no longer working or holding…
These are simple token discs for the Twisted Cryptid Print and Play expansion. I took the PNP meeples created by SnoodLife (Matt) and merged them with a flat token to allow for an MMU multicolor print of the meeples. He shows the tokens…
This is a remix of the main housing of @Rainer's Core One ESP32 Camera Case. I was looking for a USB Plug-&-Play solution for my Core One to connect straight to my Octoprint Raspberry Pi. I didn't like the ESP32-CAM module so I decided on…
This is a mounting bracket to install a wiring drag chain for the Y-axis of an Opulo Lumen PnP. This mod is NOT compatible with the official Lumen kit wiring harnesses, because the harness routing is considerably longer, however, I…
Mounting bracket to attach a Mean Well LRS-350-24 power supply to the bottom of an Opulo Lumen PnP, with space for a switched and fused mains inlet.
These are ring light mounts for the Opulo Lumen PnP that utilize standard 5V 5050 LED strips instead of the custom ring light boards designed by Opulo. A standard 3-pin JST-XH (2.5mm) header can be press-fit into the model and soldered to…
The official Opulo Lumen PnP BOM calls for a solenoid valve which includes threaded mounting holes, which are used for the mounting bracket designed by Opulo. This mounting bracket is meant to hold the “uxcell Miniature Solenoid Valve 2…
Lower mounting bracket to locate a MegaSquirt MS3 ECU in an 01-05 Miata (this may work on a 1999-2000 NB1 however I don't have one to test.) Two versions, one without a hole for a bolt of ziptie to secure the ECU (0105MiataMS3Mount.stl) ,…
The original model used recessed markings that weren't thick enough to look good when I printed them, and the individual keys were only combined into complete caps in a 3MF file that contained everything. This remix changes the keycaps to…
Passive hanger to hold 8mm tape reels for use with strip feeders on the Lumen PnP. The total width is 16mm, so the parametric strip feeder needs to be modified to match.
Yet another solution to a problem that doesn't exist… Do you want poker chip feel to your Orleans Board Game Tokens? You don't want to spend $25-$40 for upgraded plastic tokens? You can't find coin capsules that fit your tokens? You don't…
An accessory for the Opulo LumenPnP, this little bin magnetically attaches to the front edge of your staging plate to catch any parts Lumen decides to discard. The part is designed to press-fit “8x3mm”-nominal round magnets, but the parts…
The MS3 does not mount to the stock ECU mounts on an NB Miata (mine's a '99). Recommend printing with: ABS filament Fill density=30%+ Perimeters=3+ With supports These originated from Risi_turbo's MS2 mounts from…
A small tool to grab the camera lenses for adjustment. Print in 100% infill transparent filament to have minimal to have minimal blockade of the ring lights
Printed using 0.2mm layers with PLA. Print the LumenFootBody upside-down. It should not need supports. Screw the jam nut all the way down the bolt, then insert the bolt into the body. Attach the body to the Lumen under the bottom…
The Gears and Spacers should be printed in high detail (recommend 0.1mm layer height). The Feeder can be printed in 0.2mm or 0.3mm layer height. No supports are needed, but I highly recommend printing with a very large brim to keep the…
This modified version of the Datum PCB mount allows for 3D calibration using a second fiducial mark! You can find the necessary PDF for the second mark on the OpenPNP wiki here:…
This is an SMT cut tape holder specifically designed for the LumenPNP. The provided STL is for an 8mm SMT strip. There is also a *.step file that can be extruded wider to accommodate wider tape. There is an optional slit in the top of the…
16mm wide passive reel hanger for the Lumen PnP. Intended for use with the parametric strip feeder FDM-9002, modified by setting the HolderW parameter to 8.0.
Rail-mounted tool holder for the Lumen PnP, for a more rigid mount than the original plate-mounted model. Includes a removable component discard cup.
NOTE : This is for V2 of the LumenPnP. If you have a V3 or want to upgrade your V2 to a V3, go to the V3 mod . Minimalist parts required to convert the LumenPnP from v-slot rollers to linear rails. This preserves the overall dimensions…
The Lumen PNP staging plate, but as a parametric OpenSCAD design. This allows you to easily generate customized staging plates - without the camera mounting holes, double the height, different grid spacing, etc!
A parametric PCB holder designed in OpenSCAD to fit snugly into the Lumen PNP staging plate. This allows you to put in your PCB dimensions and generate a holder that will perfectly fit your PCB and hold it at the ideal height. A few…
This feeder is designed to be set up as an Auto Feeder in OpenPNP. I designed it to mount to a Lumen PNP. It uses an Arduino Mega which listens to GCODE sent over a USB serial connection in Open PNP. The Max Feeder Shield can control up…
This simple plate is protecting your LumenPnP (Opulo) motherboard from electronic components that could fall down thru the holes in the staging plate and cause short circuits or other issues with the circuit. It's 100x100mm big and has…
This is a remix of the Ploopy Pick-and-Place Feeder that has been modified to work with the Lumen PnP, along with several improvements to the basic mechanisms to improve reliability. Added a mounting bracket for installation on the Lumen…
This is a minor remix of Stargirl's linear rail mod for the Opulo Lumen PnP machine. This remix doesn't change the final geometry at all, it only makes changes to the assembly hardware, to eliminate self-tapping bolts into plastic parts.…
This is a modified head mount for the Opulo Lumen PnP machine that allows head-mounting a solenoid actuator for use with mechanically actuated feeders, such as drag feeders or my modified Ploopy Feeder . If you want to have the right head…
NOTE: This is for the V3 LumenPnP. If you're currently using V2, you'll just need to print a few additional parts which are listed below. This mod provides a minimalist set of parts for upgrading the LumenPnP X & Y axes from v-slot…
Lumen V3 Z Gantry modification to support the RPPF. https://makr.zone/new-all-3d-printed-tapereel-feeder/399/
This is a cover for the lumen PNP's v3 motherboard, which does fit the reset and boot buttons on the motherboard.
This design adds a simple SPST power switch for the Opulo LumenPnP Pick-and-Place machine. The switch mount attaches to the left side of the machine, and bolts to the 2020 extrusion on that side. Designed to utilize this switch:…
One set of player pieces for Print 'N Play Tiny Epic Galaxies. Print at 150% for nice sized pieces. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/6AczZyREINl Print Settings Printer Brand: Monoprice…
Based on the original design by Cor van Doorn. Opulo moved the cameras in Z between v2 and v3 machines. These tools provide reach to access the recessed Bottom Camera, and also allows for adjustment of the Top Camera when using my 4mm Top…
The bracket wraps around an Ikea Trotten table metal frame. You need to locate the existing holes on the inside of the top frame beams, and drill a hole on the other side of the profile so that an M5 bolt can go through. Requires: 2no…
This is a remix of Jazzychad's passive drag feeder design updated to work with the LumenPnP V3. V3 changed the nozzle's z-height which makes it no longer able to reach the previous model's tape. This remix uses a spare 2020 aluminum…
After installing Stargirl's awesome v3 linear rail upgrade and converting other parts of my machine to use the updated V3 LumenPnP parts, I found that the top camera lens was VERY close, if not touching, the nozzle rack. The nozzle rack…
Music Hall Tracker PnP Headshell Cartride Stylus Category: Music
Ortofon 2M PnP Headshell Cartridge Stylus Category: Music
This design has worked well in some testing, but has not been fully vetted! Your mileage may vary across tape types and thicknesses.
This stencil provides many of the common shapes and designs needed when crafting and designing board game prototypes. Whether you're an aspiring designer or a print'n'play enthusiast, this will help you create tokens, tiles, and game…
Based on the flange design by @qwertymodo, I modeled a press-fit model to more completely fill the bottom vision's field of view. It's 40mm in diameter, and best printed in ABS/ABS+ for its matte texture. I've printed in black so far with…
Hi, I have created my own model for Rolling Realms. What can fit inside: 2x stacks of cards 7cmx11cm and 2,5cm height 2x standart D6 dice 6x centropen fix 13,5cm lenght Rolled up rules 18,5cm lenght Model on photos includes one design…
This is a carrier for a 3.5" hard drive that slots into a standard 3.5" hotswap drive bay. I think that the case I designed it for is a CoolerMaster, but it should work with other cases. I've included the CAD files in case it need…
This is the original LumenPnP V3 nozzle rack model, modified to mount on the front rail of the machine. This improves stability, and reduces strain on the staging plate. The design is based off of that of @qwertymodo, which was for the…
To increase the rigidity of the LumenPnP (v3) toolhead, I decided to modify Stargirl's excellent linear rail mod ( https://www.printables.com/model/278803-lumenpnp-linear-rail-mods-v3 ) to support dual linear rails for the x-axis. This…
Under Falling Skiles is a solid solo Print and Play game ( https://boardgamegeek.com/boardgame/273779/under-falling-skies-9-card-print-and-play-game ). I enjoyed playing the game with the 3D components. In this entry, bring together what…
Two Rooms and a Boom - Rugged Box for Print 'n Play storage Here's my attempt at a very thematically appropriate box to store all of your Two Room and a Boom PnP cards. I used 110 weight stock paper and Ultra Pro Gaming Sleeves (82712).…
I ran into the same problem that the top camera was very low. The spacer by @jm moves the camera up 4mm but i did not have M2,5 bolts that were 4mm longer. So instead i used some random M2 screws (they can be sourced from an old laptop or…
These replacement front legs for the Lumen PnP allow the front feeder rail to be moved forward by 30mm, allowing enough room for the official feeders to be mounted on both the front and rear rails with a 360mm staging plate. The original…
Cable Chain made for Index Pick and Place machine Print Settings Printer: Custom Rafts: No Supports: No Resolution: 200 Infill: 30 Filament: 3DEA PLA Black and blue Category: Other
Keep your components neatly coiled beneath your existing drag feeders with this minimal print. It inserts snugly into the M5 screwhole and requires no modifications to your feeders. Say goodbye to big loosely hanging coils of components!…
Update 2023-07-04: Added an “XL” version of these feeders that is 30mm longer. This allows you to use them close to the home position at 0,0. The gears on the normal length feeders sit directly beneath the nozzle homing position and can…
Welcome OpenPnP Community to the PixiePlacer Wiki! The PixiePlacer is a DIY Pick and Place Machine for SMD Components based around the amazing software OpenPnP. The machine is designed to be low cost and suited towards mid-scale…
A circular discard cup that fits in the staging plate center holes.
LumenPnP's automatic feeders are a game changer. However, the reel holder didn’t play nice with the Mouser or Digikey reels I got. It didn't snugly fit as shown in their docs. So, here's a remix of that design with some handy…
i designed this dust cover for the voopoo pnp pod, stil need to test print this, i am waiting on my flex fillament to arrive to print this Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200…
Atomizer case PnP 4.5ml. Robusto e Leggero da trasportare in giro. Protegge l'atomizzatore da cadute accidentali. Dotato di una gola per il posizionamento di una guarnizione, per isolare l'atomizzazore completamente dall'esterno. Link al…
This vacuum pump mount allows you to replace the rubber bands holding the vacuum pumps without removing the mounts from the staging plate. This model has modeled in supports that can be easily cut or snapped off after printing.
