1 / 1
QIDI Q1 Pro Top Lid Riser — zdjęcie 1

QIDI Q1 Pro Top Lid Riser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

QIDI Q1 Pro Top Lid Riser, with a slightly larger (+2mm x and y) shelf for the clear lid

Ocena
3,25 / 5
Polubienia
34
Pobrania
358
Wydruki
1
Wyświetlenia
3386
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Some of the parts I found for risers that keep the PTFE tube from hitting the top clear lid just didn't quite fit properly (example: https://www.printables.com/model/823998-qidi-q1-pro-lid-riser), so I just remeasured things and created new models. Not sure if there was some variance in the early printer models or what, but figured I would redo it to fix some of the shortcomings I saw in those. It's about twice as tall as it really needs to be but I'm happy with it.

[edit October 12, 2024] I added a few models with the clear lid shelf widened by 2mm for folks that had trouble making it fit. I also added a half-height version as the original was probably twice as tall as it really needed to be. F3D and STEP files also updated.

Recommended print settings for .4mm nozzles:

  • ASA or something else more heat resistant than PLA/PETG
  • 3 perimeters, 5 top/bottom solid layers
  • 5mm brim
  • No skirt
  • Support should be one of the flat options. I used
    • 45 overhang threshold
    • 100% first layer density
    • 2mm first layer expansion
    • Snug
    • 0.2 (detachable) top contact z distance
    • Rectilinear pattern
    • No sheath
    • 2mm pattern spacing
    • 0 pattern angle
    • 2mm closing radius
    • 2 top/bottom interface layers
    • 0mm interface pattern spacing
    • 150% XY separation between object and model

Otherwise, just whatever works for you. 

Tagi