1 / 1
QIDI Q1 Pro Top Lid Riser — image 1

QIDI Q1 Pro Top Lid Riser

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

QIDI Q1 Pro Top Lid Riser, with a slightly larger (+2mm x and y) shelf for the clear lid

Rating
3.25 / 5
Likes
34
Downloads
358
Makes
1
Views
3,386
Reviews
4

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Some of the parts I found for risers that keep the PTFE tube from hitting the top clear lid just didn't quite fit properly (example: https://www.printables.com/model/823998-qidi-q1-pro-lid-riser), so I just remeasured things and created new models. Not sure if there was some variance in the early printer models or what, but figured I would redo it to fix some of the shortcomings I saw in those. It's about twice as tall as it really needs to be but I'm happy with it.

[edit October 12, 2024] I added a few models with the clear lid shelf widened by 2mm for folks that had trouble making it fit. I also added a half-height version as the original was probably twice as tall as it really needed to be. F3D and STEP files also updated.

Recommended print settings for .4mm nozzles:

  • ASA or something else more heat resistant than PLA/PETG
  • 3 perimeters, 5 top/bottom solid layers
  • 5mm brim
  • No skirt
  • Support should be one of the flat options. I used
    • 45 overhang threshold
    • 100% first layer density
    • 2mm first layer expansion
    • Snug
    • 0.2 (detachable) top contact z distance
    • Rectilinear pattern
    • No sheath
    • 2mm pattern spacing
    • 0 pattern angle
    • 2mm closing radius
    • 2 top/bottom interface layers
    • 0mm interface pattern spacing
    • 150% XY separation between object and model

Otherwise, just whatever works for you. 

Tags