Prusa MINI Retraction Value Test
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I couldn't translate retraction value from https://teachingtechyt.github.io/calibration.html#retraction, so I made a ...
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 241
- Wydruki
- 1
- Wyświetlenia
- 2623
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
Warning: please make sure gcode files are safe for your printer before using them. I take no responsible for any damage occur by the files. Use them at your own risk.
I couldn't translate retraction value from https://teachingtechyt.github.io/calibration.html#retraction for my Prusa MINI+,
So, I made a test out of teachingtechyt's retractiontestvs stl file (https://teachingtechyt.github.io/files/retractiontestv2.stl)
I cut the tower down to 1 block and into several gcode files then mix them together since I can't find a way to use prusaslicer to change retraction length between the print.
Gcode files were created from default prusaslicer profile “Generic PETG @MINI”, changing only retraction length. Retraction length +0.5 following printing order.
Tested on Prusa MINI+ with smooth spring steel sheet with PETG. The parts are very sticky to the sheet so I cut the base to save some time and filament.