Microswiss NG CR Touch Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts Cr Touch to the Microswiss NG Toolhead using two of the screws that hold the extruder stepper motor together.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 285
- Wydruki
- 2
- Wyświetlenia
- 913
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
None of the Cr Touch mounts I could find for the Microswiss NG Toolhead were going to work for my custom X axis Ender 3 Pro, so I designed my own. The design seems rather universal so I decided to release it.
To attach the mount to the extruder stepper motor, you will need two M3x25 screws and two M3 washers to replace the stock screws. I have included two versions, the base part and a version designed to use heat set inserts.
I recommend printing in either ABS or PETG, for added heat resistance over PLA.
Print with the flange on the build plate.
Material
PETG or ABS
Layer height
0.2 mm
Infill
>20%
Perimeters
3+
Top/Bottom
3+ layers
Support
Supports are not required for this to print successfully, but I have found they help the undersides come out better. On my printer at least.
Probe Offsets
X and Y offsets were calculated in cad, Z calibrated manually.
x offset: -47.25
y offset: -10
z offset: 2.110 (in Klipper on textured pei)
The Z offset I provided is to get you close, nothing more. It will most likely be a little off on your machine. You should recalibrate your z offset to account for variances in printed parts and individual machines.
Thanks