Syringe Port Protector Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is based on the "curos port protector cap" available in this link: https://www.amazon.com/Curos-Port-…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is based on the "curos port protector cap" available in this link: https://www.amazon.com/Curos-Port-Protector-Caps-Green/dp/B00T5ACJNW/ref=sr_1_3?crid=A7R2HFZJ7ZL&keywords=caps+for+iv+line&qid=1647811830&sprefix=chlorhexidine+caps+for+IV,aps,63&sr=8-3
There's no screw function in this model.
There is two different iteratins of the same model, I had to tweak the design for printing in the machine I used but, in theory, both models should be printable.
DETECTED ERRORS: Due to the ammount of layers used in Fusion 360, some artifacts appear in the slicing software when slicing the model. To avoid this please follow the following instructions:
.- Print in the "Fine quality" or "high quality" option, selecting that on your slicing software.
.- Print with the fitting hole on the top.
.- Supports shouldn't be needed
.- Enable "Print thin walls" in your slicer.
Category: Tools