Wearable casing for Seeed Studio XIAO BLE boards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for wearable using (only) XIAO BLE board and battery
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Share Alike
This is my failed attempt making XIAO BLE as a Slime VR tracker. I popped a regulator and thought I should move on with a custom PCB. However, I want this as a stepping stone for future design of other wearable devices using the same device.
The upper part of the top case also serves as a reset button.
The cap might come loose after use, which could be improved by adding a latch at the lower part of the top case.
This case accepts 39mm belt, and a 401215 battery.
Also note that the real image is the older version of the build, and the design of the power button is different but you get the idea.