Wearable casing for Seeed Studio XIAO BLE boards
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.36 – €0.44 net (excluding VAT)
For file: xiao_ble_casing_0.4n_0.2mm_PLA_MINIIS_21m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.40 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 21 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A case for wearable using (only) XIAO BLE board and battery
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 27
- Makes
- 0
- Views
- 355
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Share Alike
This is my failed attempt making XIAO BLE as a Slime VR tracker. I popped a regulator and thought I should move on with a custom PCB. However, I want this as a stepping stone for future design of other wearable devices using the same device.
The upper part of the top case also serves as a reset button.
The cap might come loose after use, which could be improved by adding a latch at the lower part of the top case.
This case accepts 39mm belt, and a 401215 battery.
Also note that the real image is the older version of the build, and the design of the power button is different but you get the idea.