Camper demountable (colored - single extruder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was looking for a demountable camper for a wedding present but can't found any statisfying. Now. I did it by myself :)
- Ocena
- 4 / 5
- Polubienia
- 54
- Pobrania
- 302
- Wydruki
- 1
- Wyświetlenia
- 1481
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The model has to be scaled for me 40 % works great (~200 mm width).
For the right and left panels I used colorchange at a specific height. Look in the slicer it works pretty well! The connection has a snug fit maybe a little droplet of super glue would be nice.
The tires are mounted by M3-screws. By implementing a M3 washer and fixing the screws gently, the tires can also rotate ;-)
The trailer coupling can be fixed by super glue. I did not use any because I like the up and down movement of the coupling.
I also attached the .f3d file for some mods please feel free! The open windows and holes in the sides and roof can be filed again. I use them to fix on a ballon for the wedding present.