Pink Floyd DSOTM Album Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recreation of DSOTM album cover for 3D printing
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 600
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
Recently I've been printing lots of Hueforges of album covers because I want to have them on my wall, and this was one I wanted, but Hueforge simply couldn't recreate all the colours. Instead, I recreated it myself by converting a high quality image of the album cover into an SVG, and then in Tinkercad I created shapes to match the lines and shapes on the album cover, retaining all of the elements. As a result it is a near 1:1 replica of the album cover and I think it turned out great.
This one is a bit of an oddball for a print because the majority of it is done in black, then a bit of white, and then all the colours in rapid succession. I've designed it so you don't need an AMS - the print is designed for pauses at each layer for colour changes, which are as follows:
Start with black
Layer 6 (1.20mm) - switch to white
Layer 11 (2.20mm) - switch to red
Layer 12 (2.40mm) - switch to orange
Layer 13 (2.60mm) - switch to yellow
Layer 14 (2.80mm) - switch to green
Layer 15 (3.00mm) - switch to blue
Layer 16 (3.20mm) - switch to purple
Layers are printed at 0.20mm so it is a fast and easy print. Use 100% infill and 1 wall.