Dyson V10 Trigger Lock - Screw Attachment Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of Choongster's trigger lock, with added holes, to use the vacuum's screws for mounting. PIP or M3 screw prints.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 101
- Wydruki
- 3
- Wyświetlenia
- 547
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
The designer of the original trigger lock explains it best: “Just my version of the Dyson V10 Trigger lock. Push hinge upwards till lock in place. To release, press trigger in and hinge should drop”.
Choongster's design is awesome, and I wanted to add to it. I modelled a mounting plate with screw holes that match the V10 perfectly. Use a Phillips head screwdriver to remove the 2 screws, and use them to mount the trigger lock (I have done this to my vacuum, and it all holds together well; know that you are doing this to your vacuum at your own risk).
There is a print-in-place version and a 2-part print that is assembled using an M3 nut and 20mm M3 screw. Don't overtighten these, and use some threadlock to keep these together.
I think this might work with a V11 vacuum as well, but I don't have one to test with. If you do and this works, please let me know, and I'll update the page to reflect this.
Please post makes, comments, and remixes. Thanks