Prusa XL anti-vibration tensioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa XL anti-vibration tensioner for the Y-axis cover of the coreXY system from Prusa XL
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 797
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
UPDATE:
New AVT 0mm (v2 final) is out!
______________________________________
Based on a great project (second design link) I redesigned and created an anti-vibration tensioner for the Y-axis cover of the coreXY system from Prusa XL.
The cover sheet has a tendency to transmit vibrations and vibrate loudly, so it is possible that the system pressing it to the profile below will reduce them.
Optionally, this part has a small notch in the middle to tighten the cover. You can print several and/or scale them on one axe in a slicer. Print on “side” of the object.
I also make Raspberry Pi mount for Prusa XL based on this design.