Prusa XL anti-vibration tensioner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prusa XL anti-vibration tensioner for the Y-axis cover of the coreXY system from Prusa XL
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 36
- Makes
- 1
- Views
- 797
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
UPDATE:
New AVT 0mm (v2 final) is out!
______________________________________
Based on a great project (second design link) I redesigned and created an anti-vibration tensioner for the Y-axis cover of the coreXY system from Prusa XL.
The cover sheet has a tendency to transmit vibrations and vibrate loudly, so it is possible that the system pressing it to the profile below will reduce them.
Optionally, this part has a small notch in the middle to tighten the cover. You can print several and/or scale them on one axe in a slicer. Print on “side” of the object.
I also make Raspberry Pi mount for Prusa XL based on this design.