Bosch Battery Holder

I needed a holder for my Bosch Professional batteries (blue devices). A model that I had downloaded from Thingiverse was unfortunately difficult to print and needed supports. I therefore created my own version that does not need supports.

The holder has a recess into which the battery catch can snap so that the batteries are securely attached to the holder and cannot fall out.

My holder comes in a total of six versions. Two standard holders for one or two batteries, each of which can be attached to a table leg or cabinet with two countersunk screws up to 3.5 mm. 
And four holders for the Honeycomb Storage Wall, each for one or two batteries and for vertical or horizontal insertion of the batteries. 

Use RostaP's print files 'double M4.stl' for the holders for one battery each (one vertically arranged element each, depending on the model, the battery is pushed into the holder from the left or right or can be pushed into the holder from above or below) or two times 'insert M4.stl' for the holders for two batteries each (optional orientation in the horizontal plane - the battery can be pushed into the holder from above or below - or in the vertical plane, for inserting the batteries from the left or right). 
You will need two M4x10 or M4x12 countersunk screws and M4 nuts for each holder.

The models 'insert M4.stl' and 'double M4.stl' can be found in the download from RostaP, see https://www.printables.com/de/model/152592-honeycomb-storage-wall/files , folder 'Fasteners and parts for attaching hooks and objects'.

My latest uploads

Over the last few weeks, I have created a few CAD models that have helped me here and there or given me pleasure.
I have now uploaded some of them to Printables. If you are interested, please take a look at my designs.