Ender 3 V3 SE 4020 fan mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another 4020 fan mount for Ender 3 V3 SE.
- Ocena
- 5 / 5
- Polubienia
- 63
- Pobrania
- 374
- Wydruki
- 1
- Wyświetlenia
- 4358
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
________________________________________________________________________________________________________________
My other Ender 3 V3 SE mods
Fan mods:
Printer mods:
________________________________________________________________________________________________________________
About project:
Smaller, more compact version of 4020 fan mount. Places 4020 fan flush with extruder motor and has additional beam for structural support.
Models differ in hole diameter - 3.8mm for heatset and 3mm for selftap.
Needed parts:
- 4020 / 4010 Fan 24v
- JST 1,25mm female connector (optional)
- 4x M3 Heatset inserts (optional)
- 4x M3x25mm or M3x15mm bolts - either for 4020 or 4010 fan
- 3x M3x5mm bolts
Assembly:
To connect fan you can either reuse old fan JST connector or use a new one, note that polarity on gantry's PCB is reversed. Red wire is ground and black wire is 24v.
________________________________________________________________________________________________________________
If you like what im doing, please consider leaving a tip :D that helps me a lot, Thanks!
https://ko-fi.com/0x53_