Ender 3 S1 4020 hotend fan duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hotend fan upgrade + Fan duct for cr-touch offset Compatible with every sprite extruder from any creality printer
- Ocena
- 3,5 / 5
- Polubienia
- 9
- Pobrania
- 61
- Wydruki
- 2
- Wyświetlenia
- 989
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
If you want to upgrade your hotend cooling fan but already installed this cr-touch offset mod then this model suits for your printer, with custom designed air duct for 4020 radial fan with fan guard included. Consider upgrade for more quiet operation and effecient cooling
Highly recommended to add some glue pads between the fan and fan duct connection gaps so the air doesn't leak out. Also you can paint those pads for aesthetics.
Parts you need:
Screws:
- M3x8mm x3
- M3x15mm x2
- Countersunk M3x5mm x1
- M3 nut
Fan:
- 24V DC 4020 radial fan
Additional soldering required.
Soldering tip: Always use shrink tubes at any soldered point
Print settings:
- Filament material:
- PETG: recommended
- ABS
- Layer Height Resolution:
- 0.2mm
- Infill:
- 20%
- Supports:
- Tree
- Everywhere