1 / 1
Dehumidifier Garden Hose Adapter 3/4" FNPT FIP to 3/4" M GHT Garden Hose Thread
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dehumidifer has 3/4" MALE NPT instead of garden hose threads. I adapted and overcame.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 261
- Wydruki
- 1
- Wyświetlenia
- 1168
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (26)Powiązane
For some reason my drain hose connection on my dehumidifier is not threaded for a garden hose. It is a 3/4" male NPT. I tried loading it up with teflon tape and it worked until something bumped it.
I couldn't find an adapter that wasn't over $10. So I generated an STL of a ¾" FNTP and an STL of a ¾" MGHT and stuck them together in TinkerCAD.
Print PETG hot at 100% infill to minimize leaks. This is a gravity drain that isn't under pressure. Coat it all around with spray paint to really help seal it.
