Euro Cylinder Lock Cover (no screws)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lock cover fitting standard euro cylinder door locks. No screws used for installation.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 133
- Wydruki
- 0
- Wyświetlenia
- 540
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Lock cover fitting standard euro cylinder door locks that have an additional 3mm or more space around the lock cylinder.
Demo model (on the photos) was printed in PLA, the cover shouldn't require more sturdiness, the downloadable files (.bgcode, .3mf) also contain PLA settings by default.
Installation doesn't require screws or other materials, however, you may use some adhesive material (e. g. thin double sided tape) on the backplate for a firm fit.
The bottom of the model features an 5mm hole which can help remove the cover with a flathead screwdriver, if you use some sort of adhesive for fitting.
Outer size of the cover is 32.5mm x 52.5mm.
Recommended print settings:
Default PLA settings (0.10 or 0.15mm layer height, 10-15% infill).
No brim or supports required.
Optional: I recommend printing with glow in the dark filament for an extra “find my lock in the dark easier” feature. :)