1 / 12
Convert your USB Charger MiBand4 to a Pen Drive (54min 2 components) — zdjęcie 1
1 / 12

Convert your USB Charger MiBand4 to a Pen Drive (54min 2 components)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,72 € – 0,88 € netto (bez VAT)

Dla pliku: 3D print Charger Base.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,80 € netto (środek widełek).

Masa podana przez autora
8 g
Czas druku podany przez autora
54 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Give other appareance to your Miband4 Charger, more easy to use and extend your cable life time.

Ocena
5 / 5
Polubienia
7
Pobrania
27
Wydruki
1
Wyświetlenia
537
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Give other appareance to your Miband4 Charger, more easy for daily use and extend your cable life time.

  1. Install mi band base “sliding” in to the printed part, the printed part have a draft angles to keep the base in place. 
  2. Please follow the pictures to route the cable in the plastic part.
  3. Install the cover with a couple of drops of loctite

 

Please enjoy this design!

Tagi