Circular Feet Stand Raiser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are feet that can be used to stop anything from touching a surface. They include holes to stop them from floating.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 1
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
These are feet that can be used to stop anything from touching a surface. They include holes to stop them from floating and to allow water to flow through them. This took me about 17 mins and 7g of filament to print 1 and about 1 hour to print 4 on my AnkerMake M5C.
Print Settings:
- No supports
- Brim (optional)
- 30% Gyroid infill (for additional strength)
Dimensions:
It is 60mm x 60mm x 17.5mm. You can scale this up or down to achieve any desired size.
I designed this using TinkerCAD. I have also posted this on Thingiverse and Make It Real.
I hope you enjoy using this design and, as always, Happy Printing!!