1 / 3
Sanwa JLF desk stand - 77.5° - v1.0 — zdjęcie 1
1 / 3

Sanwa JLF desk stand - 77.5° - v1.0

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a small desk stand for the Sawna JLF arcade stick. The JLF will sit at 77.5° in this stand.

Ocena
0 / 5
Polubienia
3
Pobrania
22
Wydruki
0
Wyświetlenia
147
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution

This is a small desk stand for the Sawna JLF arcade stick.  

The JLF will sit at 77.5° in this stand.

The lip for the plate is 2mm wide.

I have tested this print on my Bambu X1C with the following changes to a stock configuration:
- 0.4mm nozzel
- 4 Wall loops
- 4 Bottom shell layers
- Honeycomb sparse infill pattern

This was printed in matte black PLA from Bambu.

This print can easily be fabricated by JLCPCB's 3D printing service and should fall into their cheapest shipping bracket bringing the total print cost in black resin to under $5 USD shipped.

Tagi