1 / 3
Hidden nut fastener for displays — zdjęcie 1
1 / 3

Hidden nut fastener for displays

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use a hidden nut to fasten two sheets to each other in a 90 degree angle.

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
130
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

This is a simple holder that attaches two sheets to each other using a hidden nut. There are several sizes available (M3, M5) with different insets (5mm, 10mm, 15mm) and different cutouts (3mm, 5mm).

The files contain the OpenSCAD model, which needs some additional stuff found here: https://github.com/JohK/nutsnbolts

Can be printed from top or bottom. Works nicely on Prusa i3 MK3 0.6mm nozzle and Prusa i4 0.4mm nozzle, both prints made with PLA.

Set your slicer to pause the print after the last layer of the M3/M5 holder, insert the nut, and then finish the print.

Affectionately called “the grey patent block”.

Tagi