1 / 3
Hidden nut fastener for displays — image 1
1 / 3

Hidden nut fastener for displays

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Use a hidden nut to fasten two sheets to each other in a 90 degree angle.

Rating
0 / 5
Likes
1
Downloads
10
Makes
0
Views
130
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

This is a simple holder that attaches two sheets to each other using a hidden nut. There are several sizes available (M3, M5) with different insets (5mm, 10mm, 15mm) and different cutouts (3mm, 5mm).

The files contain the OpenSCAD model, which needs some additional stuff found here: https://github.com/JohK/nutsnbolts

Can be printed from top or bottom. Works nicely on Prusa i3 MK3 0.6mm nozzle and Prusa i4 0.4mm nozzle, both prints made with PLA.

Set your slicer to pause the print after the last layer of the M3/M5 holder, insert the nut, and then finish the print.

Affectionately called “the grey patent block”.

Tags