Simple kmart lamp shade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another simple lamp shade for a kmart light
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Patreon - https://patreon.com/CosmicNimbusPrinting
Cults3D - https://cults3d.com/en/users/CosmicNimbus
Hi there !
There are quite a few lamp shades around, but I wanted to try out making my own. It was pretty simple in the end and turned out ok so I thought I'd share it !
Here is my lamp
https://www.kmart.com.au/product/leo-table-lamp-43110070/
There are 2 versions of the shade. The first one had a 27mm gap for the lightbulb, which fits the standard bulb screw, but stops the bulb from screwing right in on this particular lamp. The second is a bit wider to allow the bulb to screw right into this shade.
This model is made to be printed using vase mode. I found I needed these settings to make it work
- Special mode > Spiralize Outer Contours
- Special mode > Smooth Spiralized Contours
- Mesh Fixes > Remove Holes (UNCHECKED)
I printed this in Polymaker Marble White PlolyTerra, at 0.28mm layer height
Happy Printing !