Simple kmart lamp shade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Patreon - https://patreon.com/CosmicNimbusPrinting
Cults3D - https://cults3d.com/en/users/CosmicNimbus
Hi there !
There are quite a few lamp shades around, but I wanted to try out making my own. It was pretty simple in the end and turned out ok so I thought I'd share it !
Here is my lamp
https://www.kmart.com.au/product/leo-table-lamp-43110070/
There are 2 versions of the shade. The first one had a 27mm gap for the lightbulb, which fits the standard bulb screw, but stops the bulb from screwing right in on this particular lamp. The second is a bit wider to allow the bulb to screw right into this shade.
This model is made to be printed using vase mode. I found I needed these settings to make it work
- Special mode > Spiralize Outer Contours
- Special mode > Smooth Spiralized Contours
- Mesh Fixes > Remove Holes (UNCHECKED)
I printed this in Polymaker Marble White PlolyTerra, at 0.28mm layer height
Happy Printing !