Search results: shade

Counting matching models…

Printables

Generic Red Dot Sunshade

A sunshade for generic red dots. Use some double sided tape if it has too much movement.

Printables

Headrest hook with shade mount

I wanted to mount a removable sun shade behind the headrests using magnets included with common rear window sun shades. This setup allows the shade to be installed or removed quickly and utilize the hook to hold a kid's tablet case while…

Order a print of this model

Printables

Lampshade for "Hokan" LED gooseneck lamps

I have a few of these gooseneck LED light bar lamps around the house, currently being sold under the brand Hokone . Their identifying characteristic is a distinct "ducktail" shape under where the gooseneck meets the lamp body. They work…

Order a print of this model

Printables

Pendant Lampshade [Vase mode]

This simple pendant lampshade needs to be printed in vase mode! (not the lampshade_base.stl part!) Fits in a 220x220 mm build plate. I printed it on an Ender3 V3 KE Comes in two parts: the base and the lampshade. Assembly : The base goes…

Order a print of this model

Printables

Big lampshade

Printed with 0.2 layer height, 15% infill Requires no adaptor https://www.ikea.com/se/sv/p/hemma-upphaeng-vit-10386577/ https://www.ikea.com/se/sv/p/hemma-upphaeng-svart-40386590/ or (requires the lampshade_screw, see 3MF and/or STL)…

Order a print of this model

Printables

Ikea Mittled light bar shade

I created a simple shade for the Ikea Mittled lightbar. It's modular and can be used for all length of the lightbars (40, 60, 80cm). The ripples at the front cover the seams between each part as good as possible. To connect the single…

Order a print of this model

Printables

Light Shade for Can Lights

Slips on a common (USA) recessed ceiling light to limit the light or glare in 1 direction. This one shrouds 120 degrees, at about 90mm. The kitchen light in the photo bothered her when sitting in her favorite chair. It could easily be…

Order a print of this model

Printables

Lamp shade {AME}

For better print results: Layer hight 0.2 needs a support (main part - normal Snug, adapters - Tree slim) suggested applying “Variable layer height” to improve the rounded part of the shade. Filament of main part - eSun PLA+ White. Enjoy =)

Order a print of this model

Printables

Mesh Lampshade

Mesh is a stylish lampshade for E14 bulbs printed in vase mode, featuring a fabric-like mesh texture that creates a warm and elegant ambient effect. Vase Mode on, 6 bottom layers, layers 0.2

Order a print of this model

Printables

Paddle light switch and shade for UNO lamp socket

Replace your tiny lamp knob with this easy to turn paddle one! There are 2 models. One is threaded and the other is self tapping. The lampshade should be printed using PETG unless you are using a low power/heat LED bulb.

Order a print of this model

Printables

Window shades adjustment chain coupling

This part replaces the original one. Two parts click into each others. Fell free to improve my design. Printer: Bambu Lab A1 Infill: 15% Filament: Aurapol PLA White

Order a print of this model

Printables

Lampshade CONE for the FormoLum system

This is a lampshade for the FormoLum lighting system. To use this lampshade you need to download the FormoLum Universal Base. Download the Universal Base here:…

Order a print of this model

Printables

Lampshade LAMPION for the FormoLum system

This is a lampshade for the FormoLum lighting system. To use this lampshade you need to download the FormoLum Universal Base. Download the Universal Base here:…

Order a print of this model

Printables

Lampshade PURE for the FormoLum system

This is a lampshade for the FormoLum lighting system. To use this lampshade you need to download the FormoLum Universal Base. Download the Universal Base here:…

Order a print of this model

Printables

Lampshade RINGS for the FormoLum system

This is a lampshade for the FormoLum lighting system. To use this lampshade you need to download the FormoLum Universal Base. Download the Universal Base here:…

Order a print of this model

Printables

Lampshade POLYGON for the FormoLum system

This is a lampshade for the FormoLum lighting system. To use this lampshade you need to download the FormoLum Universal Base. Download the Universal Base here:…

Order a print of this model

Printables

Lampshade VORONOI for the FormoLum system

This is a lampshade for the FormoLum lighting system. To use this lampshade you need to download the FormoLum Universal Base. Download the Universal Base here:…

Order a print of this model

Printables

Lampshade HORN for the FormoLum system

This is a lampshade for the FormoLum lighting system. To use this lampshade you need to download the FormoLum Universal Base. Download the Universal Base here:…

Order a print of this model

Printables

Lampshade CROSSED for the FormoLum system

This is a lampshade for the FormoLum lighting system. To use this lampshade you need to download the FormoLum Universal Base. Download the Universal Base here:…

Order a print of this model

Printables

Lampshade DROP for the FormoLum system

This is a lampshade for the FormoLum lighting system. To use this lampshade you need to download the FormoLum Universal Base. Download the Universal Base here:…

Order a print of this model

Printables

Lampshade ORIGAMI for the FormoLum system

This is a lampshade for the FormoLum lighting system. To use this lampshade you need to download the FormoLum Universal Base. Download the Universal Base here:…

Order a print of this model

Printables

Lampshade VASE for the FormoLum system

This is a lampshade for the FormoLum lighting system. To use this lampshade you need to download the FormoLum Universal Base. Download the Universal Base here:…

Order a print of this model

Printables

Lampshade BOLT for the FormoLum system

This is a lampshade for the FormoLum lighting system. To use this lampshade you need to download the FormoLum Universal Base. Download the Universal Base here:…

Order a print of this model

Printables

Party Shades

Get ready to turn heads on the dancefloor with these bold party shades ! Designed for carnival, disco nights, festivals , or just for fun, this 3D-printable eyewear features a futuristic pixel grid look that blends retro vibes with modern…

Order a print of this model

Printables

Lampshade FRACTAL for the FormoLum system

This is a lampshade for the FormoLum lighting system. To use this lampshade you need to download the FormoLum Universal Base. Download the Universal Base here:…

Order a print of this model

Printables

Ikea KINNAHULT Lamp Shade

Since the Ikea Kinnahult lamp came with a dark lampshade and that was blocking a lot of light, I decided to model a lampshade and print it. Walls are 0.8mm thick. Model printed without supports. For PETG: print with fan OFF (only ON for…

Order a print of this model

Printables

Bulb diffuser&shader: MR16 GU5.3. 4 models

These diffuser and shader caps are designed to reduce and direct light from ceiling mounted MR16, GU5.3 LED bulbs - perfect if your bulbs are too bright or scatter too much light. A great solution for balancing light levels without…

Order a print of this model

Printables

Chihiros WRGB 2 Pro Shades

I designed these to snap fit into the second groove of the top of the fixture. The print 3MF is oriented in the file stand up on its edge so that you can scale your Z height to the length you'd like to print (or your printer can handle).…

Order a print of this model

Printables

Lampshade e27

A printable lampshade with included holder. I recommend to print it in a heat and UV resistant material so it holds up for a while and dont release harmful gases from the hot bulb. Assembly Slide the holder down the lampshade until it…

Order a print of this model

Printables

Pumpkin lampshade with lid

Printed with 100% infill. Diameter of hole is 28.50 mm

Order a print of this model

Printables

Star Wars Imperial Lamp (Shade)(Death Star lamp) for mote host (pi & Windows)

Remix of Death Start lamp. Resized to print on an anycubic mega S - work in progress for lighting see https://shop.pimoroni.com/products/mote?variant=26218196871 Watch me as I assemble the lamp during a light test:…

Order a print of this model

Printables

Lens shade +cap for a Lubitel camera

Note that the shade is recessed, and so may not be usable on other makes of camera. My example is printed in PET-CF, 0.4 nozzle, 0.12mm layer height.

Order a print of this model

Printables

Hollow knight's shade light

This is the shade from Hollow knight, the void that lurks inside the main character. Put white LEDs in it to make it's eyes glow for ambience. Give this a like, follow me, and stay tuned for more! :)

Order a print of this model

Printables

Enbrighten Vibe Eternity Light Shades/Covers (can be adapted for other shapes)

We got a set of Enbrighten Vibe Eternity LED lights that are intended to go on your eves, and shine against the house for accent. The problem is, we used them on an awning support frame, so they don't shine right next to the house, and…

Order a print of this model

Printables

Bulb cap - to shade or glow

Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.2 Number of perimeters ... 2 Infill ...................................... 0% (only two layers) Supports ............................. no…

Order a print of this model

Printables

Verdant Shadefiend

Verdant Shadefiend Large Aberration, Chaotic Evil Lore & Background Deep within corrupted forests where planar rifts bleed necrotic energy into the wild, the Verdant Shadefiend stalks the skies. These creatures were once guardians of…

Order a print of this model

Printables

Modular Art Deco Lamp Shade for IKEA RINGSTA / SKAFTET

This lamp shade is an experimental design inspired by Art Deco aesthetics, characterized by strong vertical lines and a modular, stacked construction. It is designed specifically for the IKEA RINGSTA / SKAFTET lamp base. The shade…

Order a print of this model

Printables

Christmas village base shade

I've created this little shade to put on the base of such model. Print it using snug supports for the stars. It's easier to print than the model it derives from:…

Order a print of this model

Printables

Light Bulb Shade

Print in PETG. No Infill needed just 2 walls

Order a print of this model

Printables

DIY Roller Shades Homekit&WebUI ESP32

You can grab a code and get more info about the project here https://github.com/Andryushik/shades_homekit_esp32 Created for IKEA Fridans Roller Shades. Print it with a minimum of 4 walls and supports. I used ABS+.

Order a print of this model

Printables

Levolor Cordless Cellular Shade Button

I recently moved into a house that had these cordless cellular window shades and a couple of them were missing the button to raise the shades. I couldn't find any replacement pieces online and it looks like the company might have…

Order a print of this model

Printables

LED Lamp shade

Lamp body for Bambu Lab LED kit 001. Print in place, no supports

Order a print of this model

Printables

Wall-Mounted universal Lampshade (E14)

A wall-mounted lampshade insert designed to be installed between the bulb and the lamp socket , not attached directly to the socket itself. The original version is printed in PETG for improved heat resistance , but the design works with…

Order a print of this model

Printables

Mini Lattice Lampshade for G9 lights

Mini Lattice Lampshade for G9 lightbulbs to replace the glass shades that were originally on the lights as they needed cleaning constantly.

Order a print of this model

Printables

Zemismart 47mm roller shade adapter

To lift a fairly large and heavy roller shade, I bought a Zigbee-connected Zemismart 47 mm roller shade motor (ZM35R1). Unfortunately, the included adapters did not fit my curtain rod due to additional internal insets. I designed and…

Order a print of this model

Printables

The lampshade on the chandelier

Элу Люстру мы с мужем покупали в Leroy Marlen, когда он в России еще работал. Возможно вам пригодится этот смоделированный плафон. Печатайте на люстры пластиковые плафоны из прозрачного пластика и не страшно оставлять 7-ми летнего ребенка…

Order a print of this model

Printables

Chihiros C2 / CII lamp shade

Please mind the correct orientation during installation. The rear shade is slightly shorter to allow unobstructed movement of the lamp. For improved light efficiency, an aluminum foil layer can be added inside the shade to enhance…

Order a print of this model

Printables

Lamp shade size adaptor

This adaptor can be used to mount an IKEA lampshade to a normal uk lamp holder as the IKEA lampshade used a larger hole size.

Order a print of this model

Printables

Heart shade for cordless lamp

I used lamps from Amazon: https://www.amazon.com/dp/B0DBH4Y9RZ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Simple model to create a heart themed shade for valentine.

Order a print of this model

Printables

Spool-Style Cord Retainer / tensioner for RV Day/Night Shades and/or blinds

The little plastic retainer/tensioner part for the cord running down the height of the window, for "tiltable" blinds.

Order a print of this model

Printables

Mirror Light Shade Replacement

A replacement light cover/shade for bathroom mirror fixtures with a classic conical design. This model features a smooth, elegant cone-shaped top that transitions into a cylindrical base, perfect for covering standard vanity light bulbs.…

Order a print of this model

Printables

Valentines Love Heart Lampshade

A lampshade full of love with its 128 hearts! A cute option to warm up a room for valentines day. By default, this design has a 30mm hole, with 62mm flat faces around the hole for use with common lamp mounts and stands. You may be able to…

Order a print of this model

Printables

Volvo C30 Sun Shade Replacement Clip

This 3D-printed replacement clip offers a reliable and durable solution for your Volvo C30 rear sun shades. If your original clips have become brittle, cracked, or lost over time, this part is designed to restore the perfect hold and…

Order a print of this model

Printables

Floor standing lamp shade

A lampshade for a floor standing lamp. 9.04 inches tall, 9.82 inches wide across corners, 3 1/2 inch diameter base with 1.5 inch through hole. Example shown printed with beige PETG using fuzzy skin texture inside and out added with slicer…

Order a print of this model

Printables

Hades 2 Melinoe Armor Cel Shaded

This is a digital 3D-printable model of Melinoë’s armor from the Hades II game. Designed at full scale for cosplay, it features engraved lines for easy multi-color 3D printing and cel-shaded–style painting . The set includes the laurel…

Order a print of this model

Printables

Decor Lampshade

Compatible to IKEA 42mm bulb socket. Please like this model if you download. Tips for printing: Filament: PLA Brim: No! Supports: No! Layer height: 0.1 mm or 0.15mm Wall loops: 2 Infill: 5% Info‼: Please be careful when removing the Shark…

Order a print of this model

Printables

Decor Lampshade

Order a print of this model

Printables

Grow light shader for T8 grow light

Shader for Amazon grow light (Niello T8 Plant Lamp LED https://www.amazon.de/dp/B09QRTTTLF?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 ) to cover light leakage to the room where plant cabin is. Lamp slides in to shader and connectors hide the…

Order a print of this model

Printables

Super Mario Lampshade

Printing the Super Mario Questionmark lampshade, I ran into a couple of problems. So, I remixed it and thought I'd put the effort up on Printables. ---------------------------------------- Made it so that the walls can be printed using…

Order a print of this model

Printables

Herrnhuter A1E lamp shades/Lampenschirme

# 🇩🇪 Geometrische Licht-Kollektion Eine Serie von Lampenschirmen mit unterschiedlichen geometrischen Topologien. Optimiert für den FDM-Druck ohne Stützstruktur. ### Die Varianten * Honeycomb: Hexagonale Wabenstruktur. Maximale…

Order a print of this model

Printables

Adapter for Spiral Lamp Shade (Vase mode) for Sansi 10w Clip-On Grow Light

This is a small adapter than can be used with Sansi 10w clip-on grow lights to be able for Spiral Lamp Shade (Vase mode), which can be found here:

Order a print of this model

Printables

Lamp shade for modified illumination of Herrnhuther Ministern

I modified Torstens lamp shade to fit my modified illumination spike

Order a print of this model

Printables

Floor Lamp Shade

This floor lamp shade has a bottom diameter of 75mm and is 80mm tall. The bottom hole is 41mm in diameter. 0.6mm nozzle, 0.3mm layer, PETG, Sovol SV01

Order a print of this model

Printables

Shade Pull for Home Depot Cellular Shades

This should slide into place if you remove an end cap. Also maybe don't print it in "Blood Red" if you think you're just experimenting and probably have the dimensions wrong. Or maybe do and declare it a design choice.

Order a print of this model

Printables

Aquara roller shade 90 degree mount

Good for if you have a 3 or more sectioned window blind

Order a print of this model

Printables

90 degree hholder for Aqara Roller Shade Driver E1 RSD-M01

I needed a different way to mount the Aqara Roller Shade Driver. Så I drev one up i Fusion and printed it. I works flawless, but then agagin it's not part of a NASA rocket going to the moon.

Order a print of this model

Printables

Plant Light Shade

Shade for plant light with secure clips.

Order a print of this model

Printables

Geometric Spiral Lamp Shade - Parametric DIY Project

[Overview] This is a teardrop-shaped lamp shade designed through a "Generative Design" approach using Blender Python . The complex, intersecting spiral geometry creates beautiful, intricate shadows on surrounding walls when lit. [Design…

Order a print of this model

Printables

Chrystal ball lamp with new shade

Here is a Chrystal ball lamp.... I must cut my nails..... I used blue luminous filament but when the light is switched on it looks almost white.... go figure... the shade fits on nicely... not sure what I was thinking when I made the…

Order a print of this model

Printables

Open Source Logo Shades

There are two copies of the arm, so you do not need to duplicate or mirror it. The Arms can be printed on the large flat side but if your layer adhesion is weak the holes can break. You can print the arms on the top thin edge, using a…

Order a print of this model

Printables

Vita Shade Guide Tab Holder

I was asked to print a shade tab holder to make it easier to take photographs to send to the lab. I found a model online (paid) and figured it wasn't too hard for me to draw it up myself. Some time later in Tinkercad and I'd made a…

Order a print of this model

Printables

Minimalistic shade for IKEA SKURUP lamp

Printed in PET-GF for durability and to visually blend with other parts of the lamp.

Order a print of this model

Printables

IKEA Navlinge Clamp Lamp Flower Shaped Lamp Shade

A flower shaped lampshade for the IKEA Navlinge clamp lamp. A couple of notes on this one: It's a very tight fit (by design) I actually had to warm it up with a bit with a hairdryer to get it to fit, but it went on ok without breaking. I…

Order a print of this model

Printables

modern lampshade for industrial style lamp

Opaque lampshade for exposed lamps. The G-code is optimized for maximum strength and lightness.

Order a print of this model

Printables

Simple Shade Umbrella Hook

I have a large square shade umbrella which can get wound up and down and when it is up it acts like a big sail in the wind. To reduce the waving about I created a couple of hooks which I can tie to some light string which then ties to the…

Order a print of this model

Printables

Replacement Lamp Shade Fitting

30mm Cut-out diameter. 65mm Ring diameter. Should work fine with PLA unless light is filament bulb or tends to get warm to a point where warping of the PLA may become an issue.

Order a print of this model

Printables

Mini Shade from hollow knight

This is the knights shade from hollow knight made mini also if you want you can just change the colors on the mini knight to black to get the same result so yea.

Order a print of this model

Printables

Lightshade (v2)

Untested model for a lightshade although it will definitely fit given that v3 is a remix of this model and dimensions are the same. Adjust wall thickness to change amount of shading. PLA will probably be ok for LED bulbs but anything else…

Order a print of this model

Printables

Lightshade (v3)

Printed in matte black PLA. If non LED consider using a material with better heat resistance than PLA and adjust wall thickness and count accordingly.

Order a print of this model

Printables

Lampshade Holder

The middle hole piece of my lamp shade broke off and the top screw in piece got lost, so the shade just kept annoyingly falling down. I designed this piece in FreeCad. It's meant to sit on the lampshade's holder, and then the three…

Order a print of this model

Printables

Romatech No Sew Roman Shades Replacement Cord Ring

Replacement cord ring for the Romatech Roman Shades No-Sew Batten System https://sppindustries.com/no-sew-batten-system-for-roman-shade-system The stock cord rings would break at the small nib that fits into the battens. This model…

Order a print of this model

Printables

Male Araso head / Planes of the head / Shades of the head / Planar head

This art aid helps you capture the shading of the head for when painting or drawing portraits. The various segments on the head portrait the shading which falls on the various sides of the head from a fixed light source. The model has…

Order a print of this model

Printables

Female Araso head / Planes of the head / Shades of the head / Planar head

Order a print of this model

Printables

Replacement Lamp Shade for Lidl Livrano lamp

I printed this using Prisament ASA, which turned out to add yellowish tint to the light passing through it (although the object is white when illuminated by external light) The walls are 1,5mm thick

Order a print of this model

Printables

Lamp shade twisted flower

Spiral Lampshade for print in spiral mode. I took inspiration from this model: https://www.printables.com/model/154056-hanging-lamp-shade But I wanted a version that is more open, like a flower. So I created this one. Should be printed in…

Order a print of this model

Printables

lamp-shade-socket- mount V2

I extended the lamp shade mount on the X axis so the light can set higher within the lamp.

Order a print of this model

Printables

Twisty strips pendant lamp shade

Had the Ikea HAVSDJUP cord mounted in my office, and had no lamp shade. Fiddled around with Make My Vase, and created this. Added a 40 mm hole (negative modifier) to mount it on the cord, plus my logo (as a cutout for ventilation).…

Order a print of this model

Printables

A lampshade for an aquarium or other place, for an E14 bulb.

The lampshade is printed from transparent plastic. It is strictly forbidden to use powerful lamps, over 15 watts. The lampshade is necessary to prevent oxidation of the lamp socket contacts.

Order a print of this model

Printables

Shade Cloth Screw In Clips

These are some retaining pucks to keep shade cloth tensioned and to stop pulling through with regular staples. the screws are designed for 4 gauge screws and are designed to be slightly undersized to pull the puck into the wood. Printed…

Order a print of this model

Printables

MM3/RACEME TUNER SUNSHADE

3-27-2026 - I redesigned this after getting slight fitment issues. The old model was deleted and this one now fits as it should. I got tired of getting a glare on the screen of my MM3 tuner and not being able to see the screen clearly…

Order a print of this model

Printables

Wall light shader (with magnetic base)

This light shader can simply be attached to the wall using some double sided tape and magnets if the wires of the lamp are hard enough to keep the lamp in place. Else, a wall mount to keep the lamp in place could be used. The base is…

Order a print of this model

Printables

Lamp Shade for Ikea Skaftet

Print in Vase Mode with up to 4mm base. Mirror the design in the slicer to invert the rotation. Designed using JSCAD

Order a print of this model

Printables

Modern Ribbed Lamp Shade

Socket Compatibility: Hole Diameter: 40 mm Base/Outer Diameter: 50 mm Recommended Settings: Doesnt matter too much except spiral vase mode. feel free to try things out and give feedback so I can update the recommended settings Material:…

Order a print of this model

Printables

Filigree Lamp Shade (or Vase)

Inspired by this article ( http://www.3ders.org/articles/20141213-ancient-mathematical-technique-applied-to-3d-printed-stereographic-lampshade.html ) on 3Ders.org and Jason Cole's work Can also be flipped upside-down for a penpot or vase…

Order a print of this model

Printables

Burris AR332 Sun Shade

Slip on Sun Shade. Remove 3 rails before using.

Order a print of this model

Printables

Lamp shades

Klosze do lamp / klosz do oprawki / Lampy - Lamp shades / lampshade for lamp holder / Lamps Kilka wzorów kloszy do którego można zamontować standardową oprawkę o średnicy 40 mm do montażu np. jako wisząca lampa, lub jako klosze do…

Order a print of this model

Printables

Lamp Shade Polygon Smooth 250 mm - Vase Mode - E27 socket

No fuss lamp shade, slightly textured. Fits a standard E27 lamp socket. I have created 3 vent holes on the top: so if you have a warm lamp, the heat can escape. I would still only recommend LED lights. With the cheap IKEA SOLHETTA CLEAR…

Order a print of this model

Printables

Ceiling-Mounted Lampshade for Large Bulbs

Overview I can't imagine this will be super useful to anyone, as it was custom-designed for the light fixtures on my ceiling, but wanted to upload it anyways for posterity. A while ago I bought some 800 lumen smart bulbs for my room, not…

Order a print of this model

Printables

Osy Ring Lampshade

Osy Ring lampshade for E27 socket, made of diffusing white PETG. 150 x 150 mm Print in vase mode without supports but with wide adhesion (20 lines)

Order a print of this model

Printables

SimpliSafe Base Shade

The SimpliSafe® base station has a bright blue light that cannot be dimmed or turned off at this time. If the unit is in a visable location this can be very annoying. This shade fits the curved contour and slides over the top of the unit.…

Order a print of this model