Meilan X5 mount for Kestrel Talon X
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Meilan X5 mount for Kestrel Talon X (55cm)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 496
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mount for Meilan X5 Turn Signal light onto Kestrel Talon X (55cm).
Printed PETG, 0.2 Speed using 0.4 Nozzle.
20% Infill, Grid (others may work better).
It fits a bit snug, but should be fine reusing the existing Meilan Mount and screws.
About 95mm of 3M Electrical tape should provide enough padding along the inside for the post-mount.
Design could use a few more adjustments, but works for my needs at the moment.
Potential future fixes:
+Screw tabs to better secure clamp to the post
+Modify (design or infill) to be more flexible. Heard a crunch when sliding onto post, but seems to be secure.
+Could do without the 16/74 degree angle modification as it seems an angled post was already accounted for in the Meilan mounting hardware. I have it angled downward at its maximum at this point. But, I'm not good enough with Fusion360 to correct this after the fact.