Meilan X5 mount for Kestrel Talon X
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Meilan X5 mount for Kestrel Talon X (55cm)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 496
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mount for Meilan X5 Turn Signal light onto Kestrel Talon X (55cm).
Printed PETG, 0.2 Speed using 0.4 Nozzle.
20% Infill, Grid (others may work better).
It fits a bit snug, but should be fine reusing the existing Meilan Mount and screws.
About 95mm of 3M Electrical tape should provide enough padding along the inside for the post-mount.
Design could use a few more adjustments, but works for my needs at the moment.
Potential future fixes:
+Screw tabs to better secure clamp to the post
+Modify (design or infill) to be more flexible. Heard a crunch when sliding onto post, but seems to be secure.
+Could do without the 16/74 degree angle modification as it seems an angled post was already accounted for in the Meilan mounting hardware. I have it angled downward at its maximum at this point. But, I'm not good enough with Fusion360 to correct this after the fact.